May 15, 2010The upstairs of our house gets really hot during the summers, so I decided to try to cool it down a little by tinting the windows. I also want to install one of those attic fans. I heard that helps a lot too...but that's for another day.
I decided to test out my tinting skills on one of our 3 pane windows that gets hit really hard by the afternoon sun. I figured that I'd do one just to see what it looks like and to see how hard it would be.
The installation didn't go too bad....but it didn't turn out as nicely as I wanted. It also took me about 3 hours to do 3 1.5 x 3 foot panes. Kind of long, but I think I can cut down on the time a lot since I learn a couple of things during the test run.
1. You need to leave a small border at the edge. The smaller the border the nicer it looks, but if you put the tint right up to the edge and it goes slightly over, the tint will pop up. Took me a long time to figure out that this was the reason it was popping up. I kept going back to smooth it over and a minute later it would pop up again.
2. Once you have the tint cut to the size of your window and placed nicely, you need to squeegee as much of the water out as you can. If you don't, the tint won't stick well and it starts to peel off at the top and you need to start all over again.
3. Use a sharp razor and take your time when cutting the edge. The edging on my tints have large gaps here and there, is crooked in places, and have jagged edges on some spots. I really hate that. But that's what happens when you try to stretch a razor.

Here's a look at the finished window. FYI, It just looks clearer because the un-tinted windows are really dirty. I did a quick test of the heat blocking at around 2 in the afternoon and it really does block almost all of the heat. Hopefully I can finish up the rest of the windows before the end of the month.